This little Seat Ibiza came into the garage with a very noisy and poor running engine, the customer told us that the engine had been noisy for a while but the poor running just happened all of a sudden!
After an inspection of the engine and a full Diagnostic Code Read we came to the conclusion that the timing chain had slipped and we would need to partially strip the engine and check for damage.
Timing Tools Don’t Align
On stripping the engine we found that the timing chain had slipped one tooth on the crank gear, the reason for this was the chain tensioner was unable to keep its tension due to the amount the timing chain had stretched.
Timing Chain Replaced
We replaced the timing chain, guides and gear set, and using manufacturer specific timing tools to correctly align the crank and cam shafts we were then able to check compressions to see if any other internal damage had been caused.
Once we were happy there was no internal damage it was time for the rebuild which included an oil and filter change and anti freeze flush.
The little Ibiza was fired up and ran like a dream, after a good road test and some diagnostic tests it was time to hand it back to its owner.